Glass Furnace Tank Wall Cooling Fan

Glass Furnace Tank Wall Cooling Fan
Glass Furnace Tank Wall Cooling Fan | Furnace Sidewall Cooling Fan | Glass Melting Furnace Cooling Fan
Product Overview
The Glass Furnace Tank Wall Cooling Fan is a specialized industrial ventilation fan designed to provide controlled forced-air cooling for the tank walls, sidewalls and surrounding structures of glass melting furnaces.
During continuous glass melting operations, the furnace sidewalls and tank areas are exposed to high temperatures and demanding thermal conditions. Proper external air cooling can help control surface temperatures, reduce excessive heat accumulation and support the protection of furnace structures and refractory components.
EMS supplies customized glass furnace cooling fans for glass manufacturing plants, container glass production, flat glass production, fiberglass production and other high-temperature glass melting processes.
The fan can be configured according to required airflow, static pressure, cooling area, duct arrangement, operating temperature and installation conditions.

Key Features
1. Designed for Glass Furnace Sidewall Cooling
The fan is specifically configured for forced-air cooling around:
Glass furnace tank walls
Furnace sidewalls
Furnace exterior surfaces
Tank blocks
Furnace steel structures
High-temperature surrounding areas
2. Stable High-Volume Airflow
The fan provides continuous airflow to distribute cooling air across designated furnace areas.
Airflow can be adjusted according to:
Furnace dimensions
Cooling zones
Surface temperature
Number of cooling points
Duct configuration
3. Continuous Industrial Operation
Glass furnaces commonly operate continuously for extended periods.
The fan can therefore be configured with industrial-duty:
Motor
Bearings
Shaft
Impeller
Casing
Drive system
according to the operating requirements.
4. Multiple Cooling Zone Configurations
One fan system can supply air to multiple cooling locations through a suitable duct or distribution system.
Typical zones may include:
Furnace sidewalls
Tank wall sections
Corner areas
Bottom-side areas
Furnace steel structures
5. Variable Airflow Control
A VFD can be used when different furnace sections require different airflow levels or when cooling demand changes with production conditions.
6. Customized Fan Construction
EMS can customize the fan according to:
Airflow
Static pressure
Fan size
Motor power
Fan speed
Installation position
Outlet direction
Duct connection
Material
VFD requirements

Technical Specifications
Parameter Specification
Product Type Glass Furnace Tank Wall Cooling Fan
Application Glass Furnace Sidewall / Tank Wall Cooling
Airflow Customized according to cooling requirements
Static Pressure Customized according to duct resistance
Fan Size Customized
Motor Power Customized
Motor Voltage Customized
Frequency 50 / 60 Hz
Fan Speed Customized
Motor Speed Customized
Drive Type Direct Drive / Belt Drive / Coupling Drive
Impeller Material Carbon Steel / Stainless Steel / Customized
Casing Material Carbon Steel / Stainless Steel / Customized
Air Temperature Customized
Cooling Zone Customized
Installation Indoor / Outdoor / Customized
Rotation Direction Customized
Outlet Direction Customized
VFD Optional
Control Cabinet Optional
Air Distribution Duct Optional
Damper Optional
Flexible Connector Optional
Silencer Optional
Vibration Isolation Optional
Inspection Factory Inspection Available
Packaging Export Standard Packaging
Note: Final fan selection should be based on furnace dimensions, cooling-zone requirements, required airflow, static pressure, duct resistance, ambient temperature and installation conditions.